10ft Combo

Content simple

10ft Combo

‘Did I shut the gate?’ Stress less!

The Conron Stockie 8T will take away the worry of leaving the front gate open

Fully engineered to Australian Standards for 8T axle load rating

Available in:
3500 x 2250 x 500
4000 x 2250 x 500

Get a Quote



Features, standard across the range

  • Fully engineered for shire/council roads and on farm
  • Made from 100% Australian Steel that is heavy duty and hot dipped galvanised
  • Manufactured in accordance with Australian Standards AS 5100.2
  • Abutments made from 45mpa computer batched concrete with synthetic fibres and steel reinforcement. Being concrete the abutments are highly resistant to the nature’s elements
  • Removable heavy duty cattle rail wings
  • Cast in Swift Lifts for easy installation
  • Grid frame is easy to remove for cleaning under the grid
  • Open ended to allow water through-flow
  • Available in 3 Axle sizes

Content simple

16FT Big Beefa

BIG Cattle need a BIG Water Trough – That’s why we created the BIG Beefa

The Big Beefa is purpose built for big mobs of cattle. Holding a massive 1200lt, it’s the biggest Trough in this range.

The Big Beefa is also being widely used in cattle feedlot operations.

Dimensions: 5200mm long, 750mm wide and 500mm high
Drinking area: 16ft
Capacity: 1200 Litres
Weight: 1750kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Content simple

16ft Combo

 

Double Ended Sheep and Cattle Trough

Save time and money. Our Combo troughs give producers the flexibility of being able to water 2 paddocks from the one water source.

The 16ft Combo gives you 8 foot of drinking space on each side of the float box.

Like all our troughs, you can sweep straight through the float box and the tapered base makes trough cleaning a breeze.

Suitable for both sheep and cattle.

Sweep straight through the float box in both directions, with a tapered base falling away to either end of the trough for easy draining and cleaning.

 

Dimensions: 5200mm long, 800mm wide and 390mm high
Drinking area: 8ft either side of the float box
Capacity: 1020 Litres
Weight: 1800kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Content simple

16FT Rambo

Baa RAMBO Ewe

The Rambo is our very popular sheep and cattle Trough for larger mobs of stock. Holding 833 litres of water, this trough will exceed your livestock expectations.

Dimensions: 5200mm long, 700mm wide and 390mm high
Drinking area: 16ft
Capacity: 833 Litres
Weight: 1580kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Content simple

4FT Allrounder

ALL ROUNDER – 4 Ft Water Trough

The ideal trough to have in your sheep or cattle yards, horse, or bull paddock or out with free range pigs.

You can tuck this guy just about anywhere – The Perfect All-Rounder Trough.

 

Dimensions: 2000mm long, 700mm wide and 390mm high

Drinking area: 4 foot

Capacity: 250 Litres
Weight: 730kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Content simple

8FT Beef Bar

8ft Cattle Trough

With 8ft of drinking space and holding 620lt, the Beef Bar will exceed both yours and your cattle’s expectations.

One of our most popular sizes. This is a great all-round trough for cattle and horses.

Dimensions: 3300mm long, 700mm wide and 500mm high

Drinking area: 8ft

Capacity: 620 Litres

Weight: 1200kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Content simple

8FT Lambinator

Lambinator – 8FT Sheep and Cattle Trough

The Lambinator – not just for lambs. Our very versatile trough to complement your mixed grazing operations.

Suitable for both sheep and cattle. A highly sought after product with a large foot print across many regions.

Our most popular water trough.

 

Dimensions: 3300mm long, 700mm wide and 390mm high

Drinking space: 8ft
Capacity: 450 Litres
Weight: 1050kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Content simple

Beef Bunk

The ultimate in open feed bunks.
Will hold approximately 1m3 of feed.

Dimensions: 3000mm long x 800mm wide,
Back height 700mm, Front height 500mm
Weight: 1300kg

Come with built in Ferrell’s to easily join together with gal plates. Air gap below bunk area to prevent ground moisture spoiling feed , they offer a versatile and cost effective solution for Feedlots, Containment or Drought lots.

Get a Quote



Content simple

Lambaghini

Lambaghini Sheep Trough

The Conron Lambaghini is our 100lt Concrete Sheep Feedlot Trough.

Like all our Troughs, the Lambaghini is poured as one piece including the pedestals.

The Lambaghini is up off the ground to allow wind and dust to blow under the trough, rather than up the walls and into the trough, keeping the water cleaner for longer.

The Lambaghini fits into your busy schedule by being very quick to clean by featuring a built-in sweep out at the end of the trough. You can leave the water flowing into the trough and sweep out up over the end to clean it.

It also has a built in Sump at the Outlet end with a removable stainless-steel basket to catch grain, straw and dirt that enters the trough.

It is fitted with a 2-inch threaded outlet for quick emptying and easy connection point for continuous flow systems.

Enclosed float area with a 1-inch Brass inlet for easy connection and features our heavy-duty chequer plate lid for float protection.

We have also deigned a purpose made Trough Broom for ease of Cleaning.

The Lambaghini can also be set up to:

  • Have a continuous Flow System
  • Reticulated within the trough
  • Set float to full and use as a sweep out trough.

Most importantly, being a concrete trough, the water is kept cooler for longer.
Cool water encourages lambs to drink more which in turn improves feed conversions and reduces algae growth.

Dimensions: Overall Length 3300mm (9ft drinking space)
Height: 480mm
Width:400mm
Drinking Depth: 250mm
Capacity:100lt
Weight: 556kg

Get a Quote



Features

  • 75mm thick walls and a 100mm base of synthetic fibre, steel reinforced 45 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 1” brass inlet
  • Smooth finish to prevent water permeation
  • Sweep through access between the float and drinking areas
  • Sturdy but lightweight galvanized chequer plate lid is easy to lift and gives you plenty of room to access float valve
  • Tapered centre drainage, with sweep through, sump and strainer basket
  • Troughs are poured as one piece making them sturdy and stockproof

Content simple

Lamblot

Sheep Feed Bunk

The Lamblot Feed Bunk is ideal for feeding sheep and lambs in the paddock, Containment Lots, Drought Lot or Feedlots you name it!

Easy to fill with your feed wagon. Holding approx. .35m3 of feed

Supplied with built in Ferrell’s to easily join bunks together with our galvanised plates for continuous troughing and fence uprights

Dimensions: 3000mm long x 500mm wide
Back Wall Height: 520mm
Front Wall Height: 320mm
Capacity: .35m3
Weight: 808kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

VIEW OUR DealersContact Us